Sylomer SR 110 brown
Polyurethane Elastomer for Vibration Insulation
|Name||Price, euro./m2||Price, euro./piece|
Sylomer SR 110, brown1200 х 1500 х 25 mm sheet
Sylomer SR 110 is a unique material made by Getzner, Austria, used for vibration insulation of engineering equipment, building foundations, rail roads, etc. The material is produced in rolls or in single-piece supports of pre-defined sizes (customized). As an elastic layer between the vibration source and surface protected (the structure), Sylomer can be used along the entire supporting plane, or in fragments (under bearing assemblies).
Sylomer SR 110 can withstand static load of 0.11 N/mm2 and is used for vibration insulation of the least heavy equipment and structures.
Sylomer SR 110 is made of foamed polyurethane with mixed cell structure, with brown colorant added.
Special Features of the Material
- Low resonant frequency - wide range of vibration insulation;
- Low elasticity modulus within the entire interval of operating loads;
- High resistance to dynamic loads;
- Resistance to environmental impacts;
- Possibility of operating at temperatures from -30 to +70°С;
- Sylomer SR 110 price is determined by its high-level specifications.
|Type of material||SR110|
|Long-term static load, N/mm2*||0,11|
|Peak load, N/mm2 (maximum)*||3,0|
|Friction losses factor||0,13|
|Static modulus of shear, N/mm2 (under the maximum static load)||0,22|
|Dynamic modulus of shear, N/mm2 (under the maximum static load, 10 Hz)||0,42|
|Abrasion wear, mm3||1000|
|Static modulus of elasticity, N/mm2 (under the maximum static load)||0,87|
|Dynamic modulus of elasticity, N/mm2 (under the maximum static load, 10 Hz)*||1,36|
|Tensile strength during deformation 10%, N/mm2||0,12|