- Materials
- Sound and noise insulation
- Floor Soundproofing
- Shumanet-100Hydro
Shumanet-100Hydro
Shumanet-100Hydro is a two–layer professional solution to address two tasks at once: effective insulation of shock noise and waterproofing of floorings. The top layer based on a polymer-bitumen binder is used for additional waterproofing. While the bottom layer is a soundproof sheet to prevent propagation of shock noise. Request PriceWater-resistant underlayment with sound absorbing qualities
Shumanet-100Hydro is a dual–purpose material. It provides waterproofing for floating floors and significantly reduces shock noise.
It effectively reduces the shock noise level by up to 24 dB
Shumanet-100Hydro is used as an elastic layer in a sound insulating floating floor construction.
Acoustic felt retains its elastic properties under load and increases the shock noise insulation level of the floor structure by 24 dB.
The stability of the Shumanet-100Hydro characteristics is confirmed by long-term use of the material in construction and regular measurements at existing facilities.
Professional Waterproofing Material
Shumanet-100Hydro is designed to provide effective shock noise insulation in rooms prone to leaks, such as bathroom, kitchen, water closet.
The top layer of the underlayment is made of a reinforced polymer-bitumen membrane that protects the floor surface from leaks. Adding polymers to the bitumen binder provides high temperature resistance, durability, and strength of the waterproofing layer.
Maintenance info
Composition and description
Waterproofing layer: reinforced polymer-bitumen membrane.
Soundproofing material: acoustic felt made of 100% polyester fiber.
A similar scheme but with our underlay
Storage
Shumanet-100Hydro material should be stored in an upright position in one row in compliance with fire safety rules and away from any precipitation and groundwater.
Features of the material usage
Shumanet-100Hydro, unlike other waterproofing materials, does not require surfacing, but simply fits on the flooring surface as a single sheet. The bituminous surface of the material must face upwards, while the edges must overlap one another. The joints between the sheets of material should be sealed by softening the bitumen with a heat gun or a narrow flame gas burner.
Ready-to-use constructions with Shumanet-100Hydro
Hydro-soundproofing floor with the use of Shumanet-100 Hydro
Max. load: 320 kg/r.m.
Physical Properties
Physical and Technical Properties
Acoustics Properties
Impact noise reduction index, ΔLn,w under a screed with a surface density of 100-120 kg/m2 (20 – 25 lb.ft2) 24 dB