Sylomer

Sylomer is a vibration insulating material developed by Getzner’s engineers (Austria) and made using foamed polyurethane. The production process allows to obtain a structure with open and closed type cells. Varying of cell parameters enables to manufacture a product line featuring a set of characteristics required to solve a wide range of challenges. Ease of machining allows producing supports of pre-defined configuration in situ or upon the request. Sylomer can be applied for vibration insulation of vibro-active devices of different dimensions and weight. Request Price

Overview
Specifications
Variations

Scope of Application

Sylomer is intended for the vibration insulation of engineering equipment, building foundations, inside the structures of floating floor, etc. Material parameters are selected specifically to every project, objective and conditions.

Composition

Polyurethane elastomer with mixed type cell structure.

Distinctive Features

Resistance to outside environment, water, oils and most of chemically active substances;
Capability of withstanding 2 million load cycles;
High resistance to overloads;
Property retention during no less than 30 years under permanent load.

Maintenance info

Physical and technical characteristics of Sylomer

Type of material	SR11	SR18	SR28	SR42	SR55	SR110	SR220	SR450	SR850	SR1200
Colour	yellow	orange	blue	pink	green	brown	red	grey	turquoise	purple
Long-term static load, N/mm²*	0,011	0,018	0,028	0,042	0,055	0,11	0,220	0,450	0,850	1,200
Peak load, N/mm² (maximum)^*	0,5	0,75	1,0	2,0	2,0	3,0	4,0	5,0	6,0	6,0
Friction losses factor	0,25	0,23	0,21	0,16	0,17	0,13	0,13	0,11	0,12	0,09
Static modulus of shear, N/mm² (under the maximum static load)	0,03	0,05	0,07	0,08	0,13	0,22	0,35	0,58	0,8	0,9
Dynamic modulus of shear, N/mm² (under the maximum static load, 10 Hz)	0,1	0,12	0,15	0,17	0,26	0,42	0,64	1,0	1,4	1,6
Abrasion wear, mm³	1400	1400	1300	1200	1100	1000	1000	400	300	350
Static modulus of elasticity, N/mm² (under the maximum static load)	0,061	0,097	0,166	0,282	0,367	0,87	1,44	3,30	7,2	10,4
Dynamic modulus of elasticity, N/mm² (under the maximum static load, 10 Hz)*	0,172	0,280	0,437	0,611	0,753	1,36	2,54	5,04	11,1	16,4
Tensile strength during deformation 10%, N/mm²	0,012	0,020	0,031	0,047	0,061	0,12	0,22	0,42	0,86	1,08

Special Features of the Material;
Low resonant frequency - wide range of vibration insulation;
Low elasticity modulus within the entire interval of operating loads;
High resistance to dynamic loads;
Resistance to environmental impacts;
Possibility of operating at temperatures from -30 to +70°С;
Sylomer SR 11 price is determined by its high-level specifications.

Variations

Product	Unit
Sylomer SR 11 yellow 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 18 orange 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 28 blue 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 42 pink 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 55 green 1200 х 1500 х 12,5 mm roll	sheet
Sylomer SR 110 brown 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 220 red 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 450 gray 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 850 turquoise 1200 х 1500 х 12,5 mm sheet	sheet
Sylomer SR 1200 purple 1200 х 1500 х 12,5 mm sheet	sheet

Wholesale prices are available on request

Prices request

Where buy?

Acoustic Group
offices

find the nearest

Acoustic Group
dealers

find on the map