Frame soundproofing ceiling on hangers Ultrakustik Connect
Thickness: 130 mm
ΔRw ≈ 21 dB
When applied?
- When you need high efficiency with limited height.
- If children stomp from above, objects fall, loud music, noise from conversations, TV or a barking dog.
Overview
The structures of frameless soundproof linings are used in construction and renovation of buildings of any type and purpose for additional sound insulation of single-layer massive walls and ceilings. They have high values of weighted sound reduction index improvement of air noise and low level of radiated structural noise.
Other constructions in this section
Stretch ceiling filled with Shumanet-Thermo ECO
Frameless ceiling cladding ZIPS III-ULTRA
Frameless ceiling cladding ZIPS Vector
Frameless ceiling cladding ZIPS Modul
Frameless ceiling cladding ZIPS Cinema
Frameless ceiling cladding ZIPS-Z4
Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Show estimation for
m²
Just input your area. The estimate is recalculated automatically.
Specialized sound insulation materials:
Material
Quantity
Unit of measurement
Specialized accessories:
Material
Quantity
Unit of measurement
General construction materials:
Material
Quantity
Unit of measurement
Profile Gyproc-Standart PP 60/27
length 3 r.m.
-
pc
Profile Gyproc-Standart PPN 28/27
length 3 r.m.
-
pc
Extension PP 27х60
-
pc
Connector PP 27х60
two-level
-
pc
- The frame is fixed to the ceiling with the help of ULTRAKUSTIK Connect vibration insulating hangs. Rigid structural elements must adhere to all walls through an elastic spacer made of Vibrostack-M 100 Tape M100 material in two layers. The sound-absorbing slab Shumanet-ECO is laid in the inner space of the frame in two layers.
- After sound-absorbing slabs laying the frame is sheathed in one layer with Soundline-dB acoustic GFB triplex, and Gyproc AKUline finish plasterboard sheets are directly attached to them.
- Soundline-dB and AKU-Line plasterboard sheet facing materials are fixed with a spacing between joints. Upon completion of installation soundproofing framed cladding, the excess of protruding Vibrostak-M 100 Tape is cut off and the resulting joint is filled with Vibroseal.