English
+971581035366 / DubaiFree engineering consultation

Vibrostack-M100

It is used as an elastic vibroisolating liner at the joints of soundproof structures components with adjacent surfaces. Reduces the transmission of structural and shock noise, increases the effectiveness of soundproofing structures Request Price

High Efficiency with Low Thickness

The layered porous structure of the tape is designed to dissipate sound energy. Each layer is a barrier to noise entering the insulated room.

For maximum results, it is recommended to use Vibrostack-M with acoustic sealant. Together they increase the effectiveness of soundproofing structures by 5 dB!

Performance Stability

Vibrostack-M100 maintains stable high soundproofing characteristics under static and dynamic loads over its long service life.

Easy-to-use

Vibrostack-M100 can be easily cut with a standard construction knife. 100 mm (4 in) wide tape is perfectly suitable for most types of soundproofing structures, including ZIPS and ZIPS Floor panel systems, framed soundproof partitions, cladding, and suspended ceilings.

Features of the material usage, ready-to-use soundproofing structures and examples of implemented projects can be found in the "Usage" tab.
Go to the tab

What Vibrostack is Best for Myself?

NameWidth, mmRoll length, mRoll weight, kgApplication
Vibrostack-M100 100 30 1 Applicable with any soundproofing structures with a thickness not exceeding 100 mm (4 in)
Vibrostack-M150 150 30 1,5 Applicable with any soundproofing structures with a thickness not exceeding 150 mm (6 in)

Maintenance info

Vibrostack-M100 Composition

Vibrostack-M100 is made of high quality multilayer soundproof glass-fiber mat.

Storage

Vibrostack should be stored in its original packaging in dry premises away from any precipitation and groundwater.

Features of the material usage

Vibrostack-M100 is used as a cushioning material in building structures during the installation of ZIPS, ZIPS Floor panel systems, framed soundproof partitions, claddings, and suspended ceilings, as well as an edge layer in soundproof floating floor structures.

Ready-to-use constructions with Vibrostack-M100

Frameless wall cladding ZIPS III-ULTRA

Thickness: 55 mm
ΔRw ≈ 18 dB
Max. load: 6 kg/m2

Soundproofing frame partition on a 55 mm frame

Thickness: 108 mm
ΔRw ≈ 60 dB
Max. load: 35 kg/r.m.

Frameless wall cladding ZIPS-Z4

Thickness: 55 mm
ΔRw ≈ 19 dB
Max. load: 35 kg/r.m.

Soundproofing frame partition on a 75 mm frame

Thickness: 133 mm
ΔRw ≈ 62 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS III-ULTRA

Thickness: 55
ΔRw ≈ 18 dB

Frameless wall cladding ZIPS Vector

Thickness: 53 mm
ΔRw ≈ 14 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Vector

Thickness: 53 mm
ΔRw ≈ 14 dB
Max. load: 6 kg/m2

Under the finish coating with the use of ZIPS Floor Modul

Thickness: 110 mm
ΔRw ≈ 9 dB
Max. load: 320 kg/r.m.

Frame lining using versalite vibroinsulating hang Ultrakustik Connect

Thickness: 90 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Modul

Thickness: 83 mm
ΔRw ≈ 18 dB
Max. load: 6 kg/m2

Under the finish coating with the use of ZIPS Floor Vector

Thickness: 85 mm
ΔRw ≈ 8 dB
Max. load: 320 kg/r.m.

Frameless wall cladding ZIPS Modul

Thickness: 83 mm
ΔRw ≈ 18 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS Cinema

Thickness: 133 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frameless wall cladding ZIPS Cinema

Thickness: 133 mm
ΔRw ≈ 21 dB
Max. load: 35 kg/r.m.

Frameless ceiling cladding ZIPS-Z4

Thickness: 55 mm
ΔRw ≈ 19 dB
Max. load: 6 kg/m2

Frame soundproofing ceiling on hangers Ultrakustik Connect

Thickness: 130 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frame soundproofing ceiling on hangers Ultrakustik Connect (2 layers)

Thickness: 53 mm
ΔRw ≈ 21 dB
Max. load: 6 kg/m2

Frameless wall cladding ZIPS Slim

Thickness: 37,5 mm
ΔRw ≈ 11 dB
Max. load: 35 kg/r.m.

Independent frame cladding on coupled profile 50 mm

Thickness: 90 mm
ΔRw ≈ 24 dB
Max. load: 35 kg/r.m.
See all

Physical Properties

Roll length:
30 m (98 ft.)
Tape width:
100 mm (4 in)
Thickness:
4 mm (0.15 in)
Roll weight:
1 kg (2.2 lbs.)

Acoustic Characteristics

Surface density
300 g/m2 (1 oz.ft2)
Dynamic elasticity modulus, unit:
At a load of 2 kPa - 0.18 MPa
At a load of 5 kPa - 0.35 MPa
Relative compression ratio ɛ:
At a load of 2 kPa - 0.025
At a load of 5 kPa - 0.35

Variations

Product Unit
Vibrostack-M150
vibration damping spacer roll 30 m, width 150 mm thickness 4 mm (4,5 m2) 		pc
Vibrostek-White 100
acoustic tape liner 30 m, width 100 mm thickness 4 mm 		pc
Vibrostek-White 150
acoustic tape liner 30 m, width 100 mm thickness 4 mm 		pc
Wholesale prices are available on request
Prices request

Where buy?

Acoustic Group
offices
find the nearest
Acoustic Group
dealers
find on the map

Prices request