Soundproofing frame partition on a 75 mm frame
Thickness: 133 mm
ΔRw ≈ 62 dB
When applied?
- Suitable as a reliable standard interior partition inside the apartment with the possibility of installing a large number of utilities within the partition.
Overview
The structures of soundproofing framed partition walls are used in construction and renovation of buildings of any type and purpose. They are characterized by high values of insulation of air noise and low level of radiated structural noise.
Other constructions in this section
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Show estimation for
m²
Just input your area. The estimate is recalculated automatically.
Specialized sound insulation materials:
Material
Quantity
Unit of measurement
Specialized accessories:
Material
Quantity
Unit of measurement
General construction materials:
Material
Quantity
Unit of measurement
Profile Gyproc-Standard PP 50/40
length 3 r.m.
-
pc
Profile Gyproc-Standard PP 50/37
length 3 r.m.
-
pc
- The frame soundproofing partition should adjoin the enclosing structures exclusively through two layers of Vibrostak-M 100 Tape M150 vibration-damping spacer.
- PS 75/50 metal channels are installed with a pitch of 600 mm. The channels are connected to each other according to “back to back” principle.
- Soundline-dB and AKU-Line plasterboard sheet cladding materials are attached to the frame with a distance between joints. Upon completion of soundproofing framed cladding installation, the excess of protruding Vibrostack-M 100 Tape tape is cut off and the resulting joint is filled with Vibroseal.