English
+971581035366 / DubaiFree engineering consultation

Frame lining using versalite vibroinsulating hang Ultrakustik Connect

Thickness: 90 mm

ΔRw ≈ 24 dB

Calculate required quantity of materials

When applied?

  • When you need a smooth wall with maximum rigidity, while big noise from conversations, TV, a rodking dog or crying children interferes.
  • Mounted on a soundproofing floor and suspended soundproofing ceiling.
    Album of engineering solutions

    Overview

    The thinnest frame cladding system on vibration fasteners. The height is up to 8 meters.

    Other constructions in this section

    Frameless wall cladding ZIPS III-ULTRA
    Frameless wall cladding ZIPS-Z4
    Frameless wall cladding ZIPS Vector
    Frameless wall cladding ZIPS Modul
    Frameless wall cladding ZIPS Cinema
    Frameless wall cladding Soundline-PGP Super
    Frameless wall cladding ZIPS Slim
    Independent frame cladding on coupled profile 50 mm

    You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.

    Show estimation for m²
    Just input your area. The estimate is recalculated automatically.

    Specialized sound insulation materials:

    Material
    Quantity
    Unit of measurement
    AKU-Line, Gyproc gypsum board
    2500 x 1200 x 12.5 mm board (3m2/board)
    1 0.42
    -
    pc
    Soundline-dB, GFB
    sheet 1200х1200х16.5 mm
    1 0.7
    -
    pc
    Shumanet-ECO
    1250 х 600 х 50 mm, in a package 4 pcs./3,0 m2
    1 0.34
    -
    pc

    Specialized accessories:

    Material
    Quantity
    Unit of measurement
    Vibrostack-M100
    vibration damping spacer roll 30 m, width 100 mm thickness 4 mm (3 m2)
    1 0.73
    -
    pc
    Ultrakustik Connect
    versatile vibroinsulating hang 150x30 mm
    1 2.2
    -
    pc
    Vibroseal
    silicone neutral sealant 290 ml cartridge
    1 0.4
    -
    pc

    General construction materials:

    Material
    Quantity
    Unit of measurement
    Profile Gyproc-Standard PP 60/27
    length 3 r.m.
    1 0.84
    -
    pc
    Profile Gyproc-Standard PPN 28/27
    length 3 r.m.
    1 0.33
    -
    pc
    • PP 60/27 metal profiles are fixed to the insulated wall with the help of special ULTRAKUSTIK vibration insulating hangs. Vibration insulating hangs are installed with a pitch of not more than every 1.5 running meters of the stud, but not less than 3 pieces with a profile length of up to 3 meters.
    • Mount the hangs at a distance of no more than 150 mm from the edge of the profile. PPN 28/27 metal profiles are fixed to the enclosing structures of the floor, ceiling and side walls through two layers of Vibrostack-M 100 Tape vibration damping spacer.
    • Soundline-dB and AKU-Line plasterboardsheet cladding materials are installed to the frame with a stagger between joints. Upon completion of soundproofing frame cladding installation, the excess of protruding Vibrostack-M 100 Tape tape is cut off and the resulting joint is filled with Vibroseal.