Frameless wall cladding ZIPS-Z4
Thickness: 55 mm
ΔRw ≈ 19 dB
When applied?
- When the wall on which installation is to be performed is not leveled.
- Saves from noises of average volume - conversations, TV, barking dogs, crying children.
The maximum surface roughness available for leveling with ZIPS-Z4 system is 50 mm.
Overview
ZIPS-Z4 sound-insulating panel system consists of the ZIPS-Z4 panels and the finishing plasterboard layer. ZIPS-Z4 system with a function of surface leveling is used during construction and renovation of buildings of any type to increase soundproofing of single-layer civil structures: gypsum, brick and concrete walls, partitions, as well as reinforced concrete floor slabs. The maximum surface unevenness that can be leveled with ZIPS-Z4 system is 50 mm (2 in).
Other constructions in this section
You can calculate the approximate estimate of sound insulation in your case. To do this, it is enough to enter the surface area that is supposed to be isolated. The estimate is calculated with a 5% margin, as well as taking into account rounding to whole packages. Please note that the estimate is approximate, since it does not take into account the individual characteristics of your premises.
Specialized sound insulation materials:
Specialized accessories:
- ZIPS-Z4 panels are attached to the wall only through the existing vibrating units using plastic dowels.
- With the use of standard mounting kit, it is possible to level out differences and slopes of the surface up to 20 mm.
- With the use of additional self-adhesive ST spacers, differences of up to 50 mm can be compensated. In this case it is also necessary to use universal self-tapping screws of greater length to fix the panels.
- To achieve the declared features, the ZIPS-Z4 system must be mounted in strict accordance with the manual.